Skip to main content. As with all wall claddings, flashing is an important component required by building codes. Additional caulking at the specific area should be sufficient. Synthetic stucco is basically a rigid plastic foam board with a textured exterior liquid-applied finish that looks like stucco. Only water in the walls behind the EIFS is likely to damage the house. For 30 years, the stucco-like appearance of Exterior Insulating and Finish Systems EIFS has given commercial buildings high curb appeal, broad design and color flexibility; low maintenance and durability; and increased energy efficiency. Flashing and Building Envelope Design.
This litigious activity is far-reaching, reflecting many aspects of building envelope performance—or failure.
Common EIFS failures, and how to prevent them
The entire modern EIFS system consists of a moisture barrier usuallythe foam insulation, the plastic-cement basecoat, fiberglass reinforcing mesh, and finishes. What happens if the EIFS windows and door openings are not properly caulked and sealed? The EPS located below the windows in this scenario contained no significant amount of moisture. Even though most manufacturers withdrew their barrier EIFS from the residential market in the late 's, we still see these systems being installed now. Water Penetration Testing is performed precisely and systematically to allow us to determine the exact cause of leaks. As long as a wall is built to dry faster than any leaks can wet it, there can be few problems. Is there a solution for the leakage problems?